SPECIALTY POLYMER ADDITIVES FOR PLASTIC PROCESSING AND COMPOSITES
CERANOVUS®PN SERIES
CERANOVUS® specialty polymer additives act as melt flow modifiers in plastic applications, delivering a unique combination of operational efficiency, higher output with lower energy inputs, and higher recycled content.
PRODUCT FEATURES AND BENEFITS
INCREASED
PRODUCTION
OUTPUT
ENHANCED
SUSTAINABILITY
PROFILE
LOWER
ENERGY
CONSUMPTION
LOWER
COST
FEEDSTOCKS
IMPROVED
PRODUCT
PERFORMANCE
REDUCED
EMISSIONS
PRODUCTS
CERANOVUS® POLYETHYLENE ADDITIVES
PRODUCT |
DENSITY (g/cm3) ASTM D1298 |
DROP POINT (°C) ASTM D3954 |
PENETRATION @ 25°C in dmm (0.1 MM) ASTM D1321 |
VISCOSITY cps @ 140°C BROOKFIELD |
---|---|---|---|---|
PN15 | 0.92 | 116 | 2 | 225 |
PN20 | 0.93 | 122 | 2 | 700 |
PN25 | 0.94 | 126 | 1 | 2025 |
CERANOVUS® POLYPROPYLENE ADDITIVE
PRODUCT |
DENSITY (g/cm3) ASTM D1298 |
DROP POINT (°C) ASTM D3954 |
PENETRATION @ 25°C in dmm (0.1 MM) ASTM D1321 |
VISCOSITY cps @ 190°C BROOKFIELD |
---|---|---|---|---|
PN55 | 0.90 | 157 | 2 | 130 |
The data provided for these properties are typical values, intended only as guides, and should not be construed as sales specfications.
CASE STUDIES
100% rHDPE Dual-wall Corrugated Pipe
Boost Output and Improve Production Efficiency with CERANOVUS®PN20.
At a 3% loading level, CERANOVUS PN20 increases the melt flow of recycled HDPE resin, reducing the extruder amperage by 25% and expanding production output by 30% .
Polypropylene Compounds
Enhance Operational Efficiency and Strength with CERANOVUS® PN55.
The addition of 2% CERANOVUS PN55 improved the operational efficiency during the manufacturing of polypropylene compounds, as demonstrated by significant decreases in the extruder load and back pressure.
Polyethylene Compounds
Increase Recycled Content and Boost Properties with CERANOVUS® PN15.
At 4% loading, CERANOVUS PN15 reduces the melt fracture, and improves the processing in extrusion and injection molding operations, boosting the properties of polymer formulations with up to 50% recycled content without sacrificing performance.
HDPE Compounds
Increase Output and Strength with CERANOVUS® PN20.
The addition of 2% CERANOVUS PN20 increases operational efficiency when working with recycled resins. With a constant screw speed and throughput, extruder back pressure and energy consumption decreased 10% and 20%, respectively.
Injection Moulded PP Components
Increase Production Volumes with CERANOVUS® PN55.
Incorporating 4% CERANOVUS PN55 improves mould fill rates while maintaining the physical integrity of injection moulded parts.
Injection Moulded HDPE Components
Increase Production Volumes and Energy Savings with CERANOVUS® PN20.
Incorporating up to 5% CERANOVUS PN20 enhances HDPE injection moulding operational efficiency, without adversely affecting physical properties.
DOWNLOADS
CASE STUDIES
IMPERIAL
METRIC
DOWNLOADS
CASE STUDIES
IMPERIAL
METRIC